Phone
A thermal mass flow meter is an instrument used to measure the flow rate of a fluid by utilizing the heat transfer principle.
It works by measuring the heat transfer from a heated sensor to the flowing fluid. The flow rate is directly proportional to the amount of heat absorbed by the fluid.
Thermal mass flow meters are suitable for measuring the flow of gases, including air, natural gas, and various industrial gases.
Thermal mass flow meters offer high accuracy, wide turndown ratio, and low pressure drop. They are also suitable for a wide range of applications and are not affected by changes in temperature and pressure.
Thermal mass flow meters may not be suitable for measuring the flow of liquids or high-viscosity fluids. They also require a minimum flow rate to operate effectively.
Yes, thermal mass flow meters are designed to handle dirty and corrosive gases, making them suitable for various industrial applications.
Thermal mass flow meters can provide high accuracy, typically within ±1-2% of the measured value + 0.5% of Full Scale.
Yes, thermal mass flow meters are generally easy to install and require minimal maintenance, making them a cost-effective option for flow measurement.
The turndown ratio of a thermal mass flow meter can range from 10:1 to 100:1, allowing for accurate measurements over a wide range of flow rates.
Yes, there are thermal mass flow meters available with hazardous area certifications, making them suitable for use in hazardous environments.
Yes, thermal mass flow meters can accurately measure the flow of biogas, making them ideal for applications in the renewable energy industry.
Yes, thermal mass flow meters can accurately measure the flow of compressed air in industrial applications.
Yes, thermal mass flow meters can be used for stack gas flow measurement, providing accurate and reliable data for environmental compliance and process control.
Yes, there are thermal mass flow meters specifically designed to handle high-temperature gases, making them suitable for a wide range of industrial processes.
The response time of a thermal mass flow meter is typically fast, allowing for real-time measurement and control of the flow rate.
Yes, thermal mass flow meters are commonly used for measuring the flow of natural gas in various industrial and commercial applications.
Yes, there are insertion-style, in-line, and inline-compact thermal mass flow meters, each designed for specific installation requirements.
Yes, thermal mass flow meters can accurately measure low flow rates, making them suitable for applications where precise measurement is critical.
Yes, thermal mass flow meters can be used to measure the flow of air in HVAC systems, providing accurate data for efficient system operation.
When selecting a thermal mass flow meter, it's important to consider factors such as the type of gas to be measured, flow rate range, installation requirements, accuracy, and any specific environmental or safety considerations.
A vortex flow meter is a device used to measure the flow rate of liquids, gases, and steam in a variety of industrial applications.
Vortex flow meters work on the principle of the von Kármán effect, where a fluid passing by a bluff body creates alternating vortices. The frequency of these vortices is directly proportional to the flow rate.
Some advantages of vortex flow meters include their ability to measure a wide range of flow rates, low maintenance requirements, and suitability for a variety of fluid types.
Vortex flow meters can measure the flow of liquids, gases, and steam, making them versatile for use in different industries.
Vortex flow meters are commonly used in chemical processing, oil and gas production, water and wastewater treatment, and Steam applications.
Factors to consider include the type of fluid, flow rate range, operating temperature and pressure, and installation requirements.
Yes, vortex flow meters can be designed to withstand high-pressure environments, making them suitable for use in such applications.
Vortex flow meters can provide high accuracy, typically within ±1% of the actual flow rate, when properly calibrated and installed.
Vortex flow meters can be equipped with materials and coatings that make them suitable for measuring abrasive fluids.
Vortex flow meters generally require minimal maintenance, with periodic calibration and inspection being the primary tasks.
Yes, vortex flow meters can be used for custody transfer applications when they meet the necessary accuracy and certification requirements.
Yes, there are different designs of vortex flow meters, including insertion, inline, and multivariable models, each suited for specific applications.
Vortex flow meters can be designed to meet hazardous area classification requirements, allowing them to be used in such environments.
Vortex flow meters typically require a limited straight pipe run upstream and downstream for accurate measurements, depending on the specific model and application.
Vortex flow meters are capable of handling varying flow conditions and can provide accurate measurements across a wide range of flow rates.
Yes, there are digital vortex flow meters that offer advanced features such as digital communication protocols, diagnostics, and data logging capabilities.
Vortex flow meters offer advantages such as low pressure drop, wide turndown ratio, and resistance to wear, making them a preferred choice in many applications.
Yes, vortex flow meters can be integrated with control systems and automation platforms to provide real-time flow data for process control and monitoring.
Proper installation considerations include orientation, mounting, grounding, and ensuring sufficient access for maintenance and calibration.
Yes, vortex flow meters are commonly used for measuring steam flow in applications such as boiler systems, steam distribution, and energy management.
An electromagnetic flow meter is a device used to measure the flow of electrically conductive liquids, such as water and wastewater, in a pipe or conduit.
An electromagnetic flow meter works on the principle of Faraday's law of electromagnetic induction, where a magnetic field is applied to the flowing liquid and the resulting voltage is measured to determine the flow rate.
Electromagnetic flow meters offer high accuracy, minimal pressure loss, no moving parts in the flow stream, and can measure flow in both clean and dirty liquids.
Electromagnetic flow meters are commonly used in water and wastewater treatment, chemical processing, food and beverage production, and other industries where accurate flow measurement is essential.
No, electromagnetic flow meters are designed to measure the flow of electrically conductive liquids only.
Electromagnetic flow meters require a straight pipe run before and after the meter to ensure accurate measurement. The pipe material should also be non-magnetic to avoid interference with the meter's magnetic field.
Yes, there are electromagnetic flow meters available with ATEX and other hazardous area certifications for use in potentially explosive atmospheres.
The calibration frequency for electromagnetic flow meters can vary depending on the application and industry standards. It is recommended to follow the manufacturer's guidelines and perform regular verification checks.
Yes, many electromagnetic flow meters are bidirectional and can accurately measure flow in both forward and reverse directions.
The typical accuracy of electromagnetic flow meters ranges from 0.5% to 1% of the measured value, making them highly accurate for flow measurement applications.
Yes, there are electromagnetic flow meters designed to handle high-temperature liquids, with options for specialized materials and insulation to withstand extreme temperatures.
Electromagnetic flow meters have no moving parts in the flow stream, which reduces the need for maintenance. However, it is still important to perform periodic checks and inspections to ensure proper operation.
Electromagnetic flow meters can be equipped with specialized liners and electrode materials to withstand abrasive and corrosive liquids, making them suitable for a wide range of applications.
Electromagnetic flow meters are not affected by changes in liquid viscosity, making them suitable for measuring flow in liquids with varying viscosities.
Yes, many electromagnetic flow meters offer options for remote monitoring, data logging, and integration with control systems for real-time flow measurement and analysis.
Yes, electromagnetic flow meters are commonly used for custody transfer applications in industries such as water distribution, where accurate measurement of flow is crucial for billing and regulatory compliance.
Electromagnetic flow meters can handle air bubbles or gas pockets in the liquid without impacting accuracy, as long as the percentage of gas in the liquid is within the meter's specified limits.
Electromagnetic flow meters typically offer options for analog and digital signal outputs, as well as communication protocols such as Modbus, HART, and Profibus for integration with control and monitoring systems.
Yes, electromagnetic flow meters require a power source, typically in the form of AC or DC electrical supply, to generate the magnetic field and power the measurement electronics.
Potential sources of interference for electromagnetic flow meters include nearby electrical equipment, large metallic structures, and changes in the conductivity of the liquid being measured. Proper installation and grounding are important to minimize int
A turbine flow meter is a device that measures the rate of flow of a liquid or gas by using a rotor to spin as the substance passes through it.
The turbine flow meter works on the principle of the fluid flowing through the meter, causing the rotor to spin. The rotation of the rotor is then translated into a flow rate measurement.
Turbine flow meters are commonly used in industries such as oil and gas, chemical, pharmaceutical, and water treatment to measure the flow of liquids and gases accurately.
Turbine flow meters offer high accuracy, wide turndown ratio, low pressure drop, and suitability for a wide range of fluid types, making them versatile for various industrial applications.
Turbine flow meters may not be suitable for applications with high viscosity fluids, pulsating flows, or abrasive substances that could damage the rotor.
Turbine flow meters can provide high accuracy, typically within ±0.25% to ±1% of the actual flow rate, depending on the specific model and calibration.
Yes, turbine flow meters are commonly used for custody transfer applications due to their high accuracy and reliability when properly calibrated and maintained.
Turbine flow meters can measure a wide range of fluids, including water, chemicals, fuels, oils, gases, and other liquids with compatible material construction.
When selecting a turbine flow meter, consider factors such as fluid type, flow rate range, pressure and temperature conditions, material compatibility, and any specific industry requirements.
Yes, turbine flow meters should be calibrated regularly to ensure accurate measurements. The frequency of calibration depends on the application and the manufacturer's recommendations.
Turbine flow meters can typically be installed in any orientation, although certain models may have specific mounting requirements outlined in the manufacturer's installation guidelines.
The lifespan of a turbine flow meter can vary depending on factors such as the operating conditions, maintenance practices, and the quality of the meter. With proper care, turbine flow meters can last for many years.
Yes, some turbine flow meters are designed to meet hazardous area classifications and can be used in environments where flammable or explosive substances are present.
Yes, turbine flow meters are available in models designed for measuring both liquids and gases, offering versatility for various industrial applications.
When installing turbine flow meters, it's important to consider factors such as straight pipe requirements, upstream and downstream piping conditions, and the avoidance of flow disturbances to ensure accurate measurements.
Yes, turbine flow meters can be integrated with control and monitoring systems using various communication protocols such as analog outputs, digital interfaces, and industrial networking standards.
Yes, turbine flow meters may utilize different rotor designs, such as axial, radial, or helical, to accommodate various flow conditions and fluid viscosities.
Regular maintenance of turbine flow meters may include cleaning, inspection of the rotor and bearings, verification of electrical connections, and calibration checks to ensure accuracy.
Turbine flow meters are available in models designed to withstand high-pressure applications, with pressure ratings specified by the manufacturer for safe and reliable operation.
Factors such as fluid density, viscosity, temperature, pressure, and flow profile can affect the performance of a turbine flow meter and should be considered when selecting and using the meter for a specific application.
An oval gear flow meter is a type of positive displacement flow meter that measures the flow rate of a liquid by counting the number of revolutions of oval-shaped gears.
Oval gear flow meters offer high accuracy, reliability, and repeatability. They are also suitable for measuring viscous and corrosive liquids.
An oval gear flow meter operates by allowing the liquid to flow through the gears, causing them to rotate. The rotation is then measured to determine the flow rate.
Oval gear flow meters are suitable for measuring a wide range of liquids, including oils, fuels, chemicals, and viscous fluids.
Oval gear flow meters are commonly used in industries such as oil and gas, chemical processing, food and beverage, pharmaceuticals, and water treatment.
Yes, oval gear flow meters are designed to handle high-pressure applications and can be used in systems with elevated pressures.
Yes, oval gear flow meters are often used for custody transfer applications due to their high accuracy and reliability.
The typical accuracy of an oval gear flow meter ranges from 0.5% to 1% of the measured flow rate, depending on the model and application.
Oval gear flow meters are primarily designed for liquid measurement and may not be suitable for gas measurement applications.
Maintenance for oval gear flow meters typically involves periodic calibration, inspection of gears and seals, and ensuring proper installation and alignment.
Oval gear flow meters can provide various output options, including pulse, analog, digital, and communication protocols such as Modbus or HART.
Yes, oval gear flow meters can be installed in both horizontal and vertical orientations, depending on the specific requirements of the application.
Oval gear flow meters are suitable for measuring viscous fluids, and their performance may be affected by viscosity, but they are designed to handle such applications.
Oval gear flow meters are available in models designed to handle a wide temperature range, from cryogenic temperatures to high-temperature applications.
Yes, there are oval gear flow meter models available with intrinsically safe or explosion-proof certifications for use in hazardous environments.
The accuracy of an oval gear flow meter can be verified through calibration using a reference standard or through comparison with another calibrated flow meter.
Factors to consider when selecting an oval gear flow meter include the flow rate range, viscosity of the liquid, temperature, pressure, and compatibility with the measured fluid.
Yes, oval gear flow meters can be used for batch control applications, providing accurate measurement and control of liquid quantities.
Yes, there are oval gear flow meter models available with wetted materials that are compatible with aggressive chemicals.
Typical installation requirements for an oval gear flow meter include straight pipe lengths before and after the meter, proper alignment, and consideration of flow profile and turbulence.
A Coriolis mass flow meter is a precision instrument that directly measures the mass flow rate of liquids and gases using the Coriolis effect.
The meter vibrates a flow tube, and as the fluid passes through, it causes a measurable deflection due to the Coriolis force. This deflection is used to calculate mass flow.
It can measure liquids, gases, and slurries, including viscous fluids, cryogenic liquids, and multiphase mixtures.
Industries such as oil and gas, chemical processing, food and beverage, pharmaceuticals, and water treatment commonly use Coriolis meters.
They provide direct mass flow and density measurements, have no moving parts, and are highly accurate and reliable.
Yes, it measures both mass flow and fluid density simultaneously, enabling additional calculations like volume flow and concentration.
Accuracy is typically ±0.1% to ±0.5% of the reading, depending on the fluid and application.
No, they are not affected by upstream or downstream flow disturbances, so minimal straight pipe runs are needed.
Yes, many models are designed to handle high-pressure applications, ensuring safe and accurate operation.
With proper installation and maintenance, these meters can last for many years, even in demanding environments.
Follow manufacturer guidelines, ensuring secure mounting, proper orientation, and avoiding exposure to excessive external vibrations.
Routine checks include verifying calibration, inspecting sensor tubes for fouling or blockage, and ensuring the electronics are functioning properly.
Yes, they can measure slurries and fluids with particulates, but performance may vary based on the concentration and particle size.
Yes, specialized models are available for extremely low-temperature cryogenic fluids.
Many models come with certifications such as ATEX, IECEx, or FDA compliance for use in hazardous or sanitary applications.
Temperature limits vary by model, but many can handle temperatures ranging from -200°C to 350°C.
While they can measure multiphase flows, the presence of gas or solids can reduce accuracy and may require special considerations.
Outputs typically include 4-20mA, pulse, Modbus, HART, or digital protocols, providing flexibility for integration with control systems.
Consider factors like flow range, fluid properties, pressure, temperature, installation space, and industry-specific requirements.
Our meters offer industry-leading accuracy, robust construction, and exceptional support, making them ideal for diverse applications and industries.
A cone flow meter is a differential pressure flow meter designed with a centrally located cone that creates a predictable pressure drop to measure fluid flow accurately.
The cone in the meter disrupts the flow and creates a pressure differential between the upstream and downstream. This differential is used to calculate the flow rate.
It can measure liquids, gases, and steam, making it versatile for various applications.
They are commonly used in oil and gas, chemical processing, power generation, and water treatment industries.
High accuracy and repeatability, Compact design requiring minimal straight pipe runs, Suitable for harsh environments, Handles dirty or wet gases well
They typically offer accuracy levels of ±1% of the reading and repeatability of ±0.1%.
No, they require minimal straight pipe runs, making them ideal for installations with limited space.
Yes, the cone design reduces wear and resists fouling, making it suitable for abrasive or dirty fluids.
Cone flow meters are available in various sizes, typically ranging from 0.5 inches to 72 inches or larger, depending on the manufacturer.
Yes, they are designed to handle high-pressure applications and are often used in the oil and gas industry.
With proper maintenance, a cone flow meter can last several years, even in demanding conditions.
They are often made from stainless steel, carbon steel, or other specialized alloys to withstand corrosive or abrasive fluids.
They are capable of handling multiphase flows, but performance depends on the specific composition of the phases.
The design of the cone makes them highly resistant to flow disturbances, providing stable measurements in turbulent conditions.
Maintenance is minimal and typically involves periodic inspection and cleaning to prevent buildup on the cone.
Yes, they perform well at both high and low flow rates, providing reliable measurements across a wide range.
Outputs include analog signals like 4-20mA and digital protocols like Modbus or HART for seamless integration with control systems.
Higher initial cost compared to some flow meters, Slightly higher pressure drop compared to certain designs, Requires proper calibration for best performance
Its come with certifications like PESO, ATEX, IECEx, or ANSI for use in hazardous environments.
Our cone flow meters offer unmatched accuracy, durability, and low maintenance, making them an ideal choice for challenging applications in various industries.
An RPD (Rotary Positive Displacement) gas meter is a volumetric flow meter used to measure the flow of gases by trapping a fixed amount of gas and counting the number of times the chamber is filled and emptied.
It operates using two synchronized rotors that rotate within a precision-machined chamber, trapping and measuring gas volume accurately.
RPD meters can measure natural gas, biogas, propane, butane, hydrogen, nitrogen, oxygen, and other industrial gases.
Common applications include gas distribution, industrial gas consumption measurement, power plants, refineries, and chemical processing plants.
RPD gas meters typically have an accuracy of ±1% of the measured flow, but calibration can improve precision.
Most RPD gas meters operate in a pressure range of 0.5 bar to 16 bar, but high-pressure models are available.
Typically, they operate between -20°C to +60°C, depending on the meter design and material.
Calibration is done using a master meter or a calibration rig, following industry standards like ISO 9951 or AGA-7.
Yes, but excessive pulsations can impact accuracy. A pulse dampener or flow conditioner is recommended in such cases.
Unlike turbine or vortex meters, RPD meters do not require long straight pipe runs for accurate measurement.
It should be installed horizontally or vertically, as per manufacturer guidelines, with proper gaskets and leak-proof connections.
Regular maintenance includes cleaning, lubrication (if required), and periodic calibration to ensure accuracy.
No, moisture can damage the internal components. A gas filter or moisture separator should be used in such cases.
Calibration should be performed annually or as per regulatory and operational requirements.
Common issues include dirt accumulation, rotor wear, incorrect installation, and leaks, all of which can affect accuracy.
It can provide mechanical (counter) readings, pulse output, and digital communication like Modbus, M-Bus, or 4-20mA.
Yes, with the appropriate communication module, it can be integrated into SCADA, PLC, or BMS systems for remote monitoring.
Pulse output helps in data logging, remote monitoring, and integrating with digital flow computing systems.
Yes, they are often certified under MID, OIML R137, AGA, or ISO standards for fiscal metering applications.
Yes, if used in explosive environments, they should comply with ATEX, IECEx, or other explosion-proof certifications.
A turbine gas meter is a flow measurement device that uses a rotating turbine wheel to measure the volumetric flow rate of gases.
As gas flows through the meter, it spins a turbine rotor. The speed of rotation is proportional to the gas flow rate, which is measured and converted into a digital or analog output.
It can measure natural gas, biogas, propane, butane, hydrogen, nitrogen, oxygen, and other industrial gases.
These meters are widely used in gas distribution networks, industrial gas measurement, power plants, and refineries.
Turbine gas meters typically have an accuracy of ±1% but can be improved with calibration and flow conditioning.
It depends on the model, but standard meters operate from 0.5 bar to 100 bar or more.
Usually, they operate between -20°C to +70°C, but special versions are available for extreme conditions.
Calibration is performed using a reference flow standard, often following ISO 9951 or AGA-7 standards.
Yes, straight pipe runs (typically 5-10 times the pipe diameter upstream and 3-5 times downstream) are required for accurate measurement.
No, pulsating flow can affect accuracy. Flow conditioners or dampeners may be needed in such cases.
It should be installed in a horizontal or vertical position with proper inlet and outlet straight pipe sections for stable flow measurement.
Periodic maintenance includes checking bearings, cleaning the rotor, and verifying calibration.
Common issues include dirt accumulation, rotor damage, improper installation, and excessive vibration.
Annual calibration is recommended, but it depends on operational conditions and regulatory requirements.
No, contaminants and moisture can damage the rotor. A gas filter or separator should be used.
It can provide pulse output, analog signals (4-20mA), and digital communication (Modbus, M-Bus, or HART).
Yes, with appropriate communication modules, it can be connected to SCADA, PLC, or BMS systems for remote monitoring.
The pulse output is used for remote monitoring, data logging, and integration with flow computing systems.
Yes, many models comply with MID, OIML R137, AGA, or ISO standards for fiscal metering.
Yes, if used in explosive environments, they should comply with ATEX, IECEx, or similar safety certifications.
An ultrasonic level transmitter is a device used to measure the level of a liquid or solid within a container using ultrasonic sound waves.
The transmitter emits ultrasonic pulses that travel to the surface of the material being measured and then bounce back to the sensor. The time it takes for the pulse to return is used to calculate the level of the material.
Ultrasonic level transmitters are non-contact, easy to install, and suitable for a wide range of applications. They are also unaffected by the color, transparency, or chemical properties of the material being measured.
Ultrasonic level transmitters are commonly used in industries such as water and wastewater treatment, chemical processing, food and beverage, and pharmaceuticals.
Yes, many ultrasonic level transmitters are designed to withstand outdoor conditions and can be used in applications such as tank level monitoring in remote locations.
Ultrasonic level transmitters can be equipped with advanced signal processing to filter out interference from agitators, foam, or other obstructions, making them suitable for challenging environments.
Ultrasonic level transmitters can typically measure levels ranging from a few inches to several tens of feet, depending on the specific model and application.
Ultrasonic level transmitters are generally low-maintenance, but it is recommended to keep the transducer clean and free from obstructions to ensure accurate measurements.
Yes, there are ultrasonic level transmitters available that are designed to meet the requirements for hazardous area classifications, such as those with explosion-proof housings.
Ultrasonic level transmitters can provide high accuracy, typically within a few millimeters or fractions of an inch, depending on the specific model and conditions.
Yes, there are ultrasonic level transmitters designed to measure levels in pressurized tanks, and they can compensate for the pressure to provide accurate readings.
Ultrasonic level transmitters can be equipped with temperature compensation to ensure accurate measurements even in environments with fluctuating temperatures.
Yes, some ultrasonic level transmitters can be configured to measure multiple points within a tank, providing a more comprehensive view of the material level.
Yes, ultrasonic level transmitters can be integrated with various control systems and communication protocols to provide real-time level data and enable automated control.
There are ultrasonic level transmitters available with chemical-resistant materials that can withstand exposure to corrosive liquids.
The lifespan of an ultrasonic level transmitter can vary depending on usage and environmental conditions, but they are generally designed for long-term reliability.
Yes, ultrasonic level transmitters can be used in conjunction with flow measurement algorithms to measure flow rates in open channels or rivers.
Ultrasonic level transmitters may require periodic calibration to ensure accurate measurements, and some models may offer self-calibration features.
There are ultrasonic level transmitters available that are designed to withstand high temperatures, making them suitable for applications in industrial processes.
Ultrasonic level transmitters should be installed in a location that provides a clear line of sight to the material being measured, and proper mounting and alignment are essential for accurate measurements.
A capacitance level transmitter is a device used to measure the level of a material in a vessel or tank by detecting the change in capacitance between the probe and the vessel wall.
The transmitter uses the principle of capacitance to measure the level of a material. It generates an electrical signal that varies with the level of the material in the vessel.
Capacitance level transmitters are highly accurate, suitable for a wide range of materials, and can operate in harsh environments. They are also easy to install and maintain.
Capacitance level transmitters can be used to measure the level of liquids, solids, and slurry materials in various industries.
Yes, there are capacitance level transmitters designed for use in hazardous environments, such as those with explosive atmospheres.
Capacitance level transmitters can provide high accuracy, typically within a few millimeters, depending on the application and the specific model of the transmitter.
Yes, there are capacitance level transmitters designed to withstand high temperatures and pressures, making them suitable for challenging applications.
The transmitter should be installed in a location that provides a representative measurement of the material level and allows for easy access for maintenance and calibration.
Calibration of a capacitance level transmitter involves adjusting the settings to ensure accurate measurement based on the specific characteristics of the material being measured.
Yes, capacitance level transmitters are commonly used for continuous level measurement, providing real-time data on the material level in a vessel.
Regular maintenance may include cleaning the probe, inspecting for damage, and verifying calibration to ensure accurate measurements.
Yes, capacitance level transmitters can be used to measure the interface between two immiscible liquids or between a liquid and a solid material.
Capacitance level transmitters may have limitations in applications with extreme temperature, pressure, or highly conductive materials. It's important to select the appropriate model for the specific application.
Common troubleshooting steps include checking the power supply, examining the probe for damage or buildup, and verifying the calibration and settings of the transmitter.
Yes, capacitance level transmitters can be integrated with various control systems, allowing for automated monitoring and control of material levels.
The lifespan of a capacitance level transmitter can vary depending on usage, environmental conditions, and maintenance, but they are designed to be durable and reliable for long-term use.
Many capacitance level transmitters offer communication options such as HART, Modbus, Foundation Fieldbus, and others for seamless integration with control and monitoring systems.
Yes, there are capacitance level transmitters designed to handle applications with agitation or turbulence, providing accurate measurements even in challenging conditions.
Yes, there are various probe designs available to suit different applications, including flexible, rigid, and cable probes, as well as specialized designs for specific materials.
Yes, capacitance level transmitters can be used for open channel level measurement by using specialized probes designed for this application.
A hydrostatic level transmitter is a device that measures the liquid level in a tank or vessel by determining the pressure exerted by the liquid column at a specific point.
It measures the pressure at the bottom of a liquid-filled tank. The pressure is proportional to the liquid level and its density, and the transmitter converts this pressure into an electrical signal.
It can measure a wide range of liquids, including water, oil, chemicals, and even slurries.
Industries such as water treatment, oil and gas, chemical processing, food and beverage, and pharmaceuticals commonly use these transmitters.
Simple and reliable measurement principle, Suitable for a wide range of liquids, Cost-effective for most applications, Can be used in pressurized or open tanks
Accuracy typically ranges from ±0.1% to ±0.5% of the full-scale range, depending on the model and application.
Yes, transmitters with corrosion-resistant materials like stainless steel or specialized coatings are available for use with corrosive liquids.
Yes, some models are designed to handle high temperatures by using remote seals or high-temperature materials.
The maximum depth depends on the model but typically ranges from a few meters to several hundred meters.
Yes, proper calibration is necessary for accurate level measurement and to account for liquid density and specific application conditions.
The transmitter must be configured for the specific density or specific gravity of the liquid being measured for accurate results.
Yes, they are suitable for both open and closed (pressurized) tanks.
Extreme temperature variations can affect performance, but many models include temperature compensation for accurate measurements.
It is typically installed at the bottom of the tank or submerged into the liquid. Follow manufacturer guidelines for proper installation.
Routine maintenance includes cleaning the sensor to remove any buildup and verifying calibration periodically.
Yes, they are suitable for slurries, but proper design and material selection are critical for longevity and accuracy.
Common output options include 4-20mA, HART, Modbus, and other digital protocols.
Accuracy depends on stable liquid density, Performance can be affected by extreme pressure or temperature fluctuations, Requires proper configuration for each application
Many models are certified for use in hazardous environments (e.g., ATEX, IECEx) or sanitary applications (e.g., FDA, EHEDG).
Our hydrostatic level transmitters are engineered for precision, durability, and ease of use, providing reliable performance across a variety of industrial applications.
A head mount temperature transmitter is a compact device that converts a temperature sensor signal (RTD or thermocouple) into a standardized output signal, typically 4-20mA or digital communication.
It improves signal stability, reduces electrical noise interference, and allows long-distance transmission of temperature measurements.
It supports RTDs (Pt100, Pt1000) and thermocouples (Type J, K, T, E, etc.).
It is used in industrial processes, HVAC systems, power plants, food processing, oil & gas, chemical plants, and pharmaceutical industries.
A head mount transmitter is compact and fits inside the sensor connection head, whereas a DIN rail transmitter is installed inside a control panel.
Most transmitters provide a 4-20mA output, but some models support HART, Modbus, or Profibus communication.
It depends on the sensor type but typically supports -200°C to +850°C for RTDs and -270°C to +1300°C for thermocouples.
Yes, it usually operates on 12-36V DC, with 24V DC being the most common.
Accuracy depends on the model, but it is typically ±0.1°C for RTDs and ±1°C for thermocouples.
Yes, most modern transmitters can be configured using software or DIP switches.
It is mounted inside the connection head of a temperature sensor using screws and connected to the sensor wires.
It uses 2-wire or 3-wire connections for RTDs and 2-wire connections for thermocouples.
Yes, but it must be ATEX or IECEx certified for use in explosive environments.
Calibration frequency depends on application requirements, but annual calibration is recommended.
Issues include sensor drift, wiring faults, power supply fluctuations, and incorrect configuration.
Yes, the 4-20mA output or digital protocol (HART, Modbus) allows integration with PLCs, DCS, and SCADA systems.
HART (Highway Addressable Remote Transducer) is a digital communication protocol that allows remote calibration and diagnostics.
Some models offer dual-channel outputs for redundancy or different signal formats.
Certifications may include ATEX, IECEx, SIL (Safety Integrity Level), and CE marking.
Yes, but it should be housed in a stainless steel enclosure with an IP67/IP68 rating to meet food & pharmaceutical industry standards.
An infrared gas detector is a device that uses infrared light to detect the presence of specific gases in the air, based on the absorption of infrared light by gas molecules.
The detector emits infrared light through a gas sample, and when the gas absorbs some of the light, the sensor detects the change in light intensity, indicating the concentration of the gas.
Infrared gas detectors are commonly used to detect gases like carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), and hydrocarbons, among others.
Industries such as oil and gas, chemical processing, environmental monitoring, HVAC, and safety-critical industries use infrared gas detectors for leak detection and environmental monitoring.
High sensitivity and selectivity for specific gases, Suitable for detecting gases in high concentrations, Non-consumable sensors with long lifespan, Immune to interference from other gases or environmental conditions
Accuracy typically ranges from ±1% to ±3% of the full-scale range, depending on the detector and gas being measured.
Yes, some models can be configured to detect multiple gases simultaneously, making them suitable for complex applications.
Yes, there are explosion-proof models certified for hazardous areas such as ATEX, IECEx, and UL, ensuring safety in volatile environments.
Maintenance typically includes periodic calibration, cleaning the lens, and checking for any sensor degradation or damage.
Infrared gas detectors typically have a long lifespan, with sensors lasting anywhere from 5 to 10 years depending on the model and conditions.
Infrared gas detectors are less affected by temperature and humidity compared to other types of gas detectors, but extreme conditions may still require compensation or calibration.
They are highly selective for specific gases, reducing the likelihood of false positives due to cross-sensitivity, but calibration is required for accurate detection.
Common output options include analog signals like 4-20mA, relay outputs, and digital protocols like Modbus or HART for integration with control systems.
The detection range typically varies from low parts per million (ppm) to high percentage levels, depending on the target gas and detector model.
Yes, they are well-suited for monitoring gases in confined spaces such as storage tanks, pipelines, or industrial facilities.
The response time varies by model and gas being detected, but it generally ranges from a few seconds to a minute for a significant concentration change.
Calibration is typically performed using certified gas mixtures or a reference standard, and it should be done periodically to maintain accuracy.
Limited to detecting gases that absorb infrared light, Can be affected by very high or low concentrations of gases, Requires clear optics for accurate measurements
Common certifications include PESO, ATEX, IECEx, ensuring the detectors are suitable for various hazardous environments and safety standards.
Our infrared gas detectors provide high accuracy, reliability, and long-term stability, offering advanced safety features and ease of use for a wide range of industrial and environmental applications.
A flame detector is a sensor designed to detect the presence of an open flame by analyzing ultraviolet (UV) or infrared (IR) radiation emitted by the fire.
The main types include UV (Ultraviolet), IR (Infrared), UV/IR (combined), and Triple IR (IR3) flame detectors.
A UV flame detector detects ultraviolet radiation from flames, typically in the 180-280 nm wavelength range, triggering an alarm when it senses a flame.
An IR flame detector detects infrared radiation emitted by hot gases in a flame, usually in specific IR spectral bands.
A UV/IR detector combines ultraviolet and infrared sensing to improve reliability, reducing false alarms from sunlight or hot surfaces.
A Triple IR (IR3) flame detector uses three infrared sensors to detect flames while filtering out false alarms caused by background IR sources.
UV/IR: Up to 15-30 meters IR: Up to 30-50 meters IR3: Can detect flames up to 60-70 meters How fast do these detectors respond to a fire? Response time varies but is typically 3-5 seconds depending on the fire size and type of detector.
Yes, these detectors do not rely on visible light and can operate in total darkness.
UV detectors: Welding arcs, lightning, and sunlight reflections. IR detectors: Hot surfaces, halogen lights, and heated machinery. IR3 detectors: Have advanced filtering to minimize false alarms. What is the field of view of a typical flame detector? Most
Yes, advanced flame detectors can differentiate between hydrocarbon fires (gasoline, methane) and non-hydrocarbon fires (hydrogen, metal fires).
It should be mounted at a high point, angled towards potential fire hazards, and free from obstructions.
Yes, but they should be weatherproof (IP66/IP67 rated) and resistant to environmental interferences like rain, dust, and fog.
Regular testing every 3-6 months is recommended, following manufacturer guidelines.
Most detectors self-calibrate but should be periodically tested using a test lamp or fire simulation source.
Use a test lamp to simulate a flame and verify alarm activation.
They are used in oil & gas plants, power plants, chemical processing, aviation hangars, storage tanks, refineries, and manufacturing facilities.
Yes, many models are ATEX, IECEx, and FM-approved for use in hazardous locations.
Yes, they can be connected to fire alarm panels, gas suppression systems, and industrial control systems for automatic response.